Logo

How to Clean Kuvings Slow Juicer – 2 Easy Steps

Are you the proud owner of a Kuvings Slow Juicer? If so, congratulations! You have made a wise choice in purchasing one of the best juicers on the market. But like any other, you must clean your Kuvings Slow Juicer regularly. It is necessary to ensure the optimal performance of the blender as well as for your health and safety. Now the question is, How to clean Kuvings slow juicer? Don’t worry – cleaning your Kuvings Slow Juicer is easy! Just follow the simple steps outlined in this blog post, and you’ll have it sparkling clean in no time. Thanks for reading, and Happy Juicing!

You will need the following tools to Clean your Kuvings slow juicer:

  •  The toothbrush,
  •  The green rotational cleaning brush
  •  A microfiber cloth!

Step-1 Cleaning the lid, juicing bowl, and auger

(a) Disassemble your juicer

It’s simple and can easily separate the lid, juicing bowl, and auger. None of these is sharp, so you don’t worry about any risk of cutting your fingers.

(b) Cleaning the Lid

You can then begin by cleaning the lid. You shouldn’t be worried about cutting your fingers because there are no sharp edges or parts here. While plain water will work, a little dish soap won’t hurt if you juiced something with a higher sugar level.

(c) Cleaning the Auger

You can then begin using the auger. Again, you shouldn’t be concerned that this will cut your fingers. Our juicers don’t have any sharp blades. As such, it wouldn’t cut your finger like a centrifugal juicer might. The pulp from the auger can be removed with just a steady stream of running water from the sink.

(d) Cleaning the juicing bowl

The juicer bowl isn’t too challenging to clean. To remove the pulp that may be lodged in the pulp chute of the bowl, use the toothbrush’s backside. All the pulp will fall out with the aid of running water.

Remember to rinse your rotation wiper’s silicons as well! Sometimes the hidden pulp can become caught here and accumulate over time. You can rinse below by pulling on the silicon.

When you finish that, you will complete 90% of the work. It shouldn’t have taken you more than a few minutes to complete the above steps.

Step-2 Cleaning the juicing screen-the most tricky part

We are now moving on to the section I believe most of you will be worried about. The juicing screen! We clean the screen using one of three techniques. You’re going to learn all three from us.

Process 1: Green Rotation Brush Invented by Kuvings

Only Kuvings make cold press juicers with a proprietary cleaning tool for the juicing screen. The company provides this cleaning tool in a box with Every Kuvings juicer. You must first hold the juicer under running water to clean the juicer screen. Then Insert your screen into the device and twist it clockwise and counterclockwise a few times.

The small rotation brush will reach all around the stainless steel juicing screen. The process will remove all that bothersome pulp buildup.

Process-2: Using a toothbrush

This one is rather easy to understand. Brush the holes in the juicer screen with the toothbrush. The rotational tool sometimes may not clean the difficult-to-reach pulp fragments. But you can easily clean them with the help of a toothbrush.

Process-3: The Secret Technique

Simple microfiber cloth for kitchen cleaning that might be lying around can help greatly. You probably were unaware that it might be used to assist in cleaning your juicing screen.

How would you use it? To begin, wet the microfiber cloth. When it’s nice and damp, wrap your finger over it (as if you were preparing to polish a pair of shoes) and rub! The tiny fibres of the clothing will pass through the strainer’s holes. This action will effectively remove the pulp from the screen. Rub for a little while, and you’ll see that it worked a miracle, and the strainer has turned as clean and bright as new!

To Know More: What is a Centrifugal Juicer? 

FAQ:

Q: How do you clean a slow juicer?

Yes, cleaning and maintaining Kuvings juicers can be quite easy. Start by disassembling your juicer and soaking the lid and juicing bowl in warm soapy water. Use your toothbrush to scrub any residue from the auger and filter basket. Then rinse everything thoroughly with running water. Clean the juicing screen using the green rotational brush and a toothbrush. Also, use a microfiber cloth for the final touch. Finally, rinse all parts again before reassembling your Kuvings Slow Juicer.

Q: How do you clean the inside of a juicer?

To clean the inside of a juicer, start by disassembling it and removing the lid, juicing bowl, and auger. Soak them in warm soapy water for 3 minutes. Next, use your toothbrush to scrub away any residue from the auger. Finally, clean the juicing screen with the green rotational cleaning brush and a microfiber cloth. Rinse everything with running water, and you’re done!

Q: How do I get rid of mineral buildup in my juicer?

The best way to get rid of mineral buildup in your juicer is to use a solution made from equal parts white vinegar and water. Fill the juicer with this solution and let it sit for about 15 minutes. Use a toothbrush or green rotational cleaning brush to scrub any stubborn buildup. Then rinse with running water and dry with a clean cloth.

Conclusion

We all realize how unpleasant cleaning our juicers are. But to maintain the healthy performance of our juicer, we must do it regularly. If you treat your juicer well, it will return the favour. We hope this information has helped you understand how to clean Kuvings slow juicer. The more you practice, the simpler it will get. Once you get used to it, washing your Kuvings shouldn’t take more than 5 minutes. If you have further questions or suggestions, please feel free to write in the comment box below. Enjoy Juicing!

Read More: How Do Masticating Juicers Work?

1 thought on “How to Clean Kuvings Slow Juicer – 2 Easy Steps”

Leave a Comment