How to Stop a Hand Blender Splashing? It is a common problem for several blender owners. I have experienced this a couple of times. That’s why I’m determined to help you find the solution. So, How to stop a hand blender from splashing?
This frustrating issue can be a bad headache for you. Do you decide to purchase a new blender? Pause the decision and I have a plan for you. You can avoid the issue by following a few tips. This is not a permanent solution but it’ll help you to keep your blender splash free.
So, how to solve it? You will get 100+ methods all over the internet. Unfortunately, several of these methods don’t work. I’ve tasted several of these. Trust me, none of them work as they describe. You will get a workable method here. So, without wasting time let’s get started.
What is Hand Blender Splashing?

During blending, the food mixer creates a vortex of spinning liquid. This creates an effect called hand blender splashing. The food particles and droplets are thrown up in the air due to the high speed of the blades.
Should I stop it? Yes. Sometimes, it is possible to reduce the splashing. However, it is important to note that hand blender splashing can be dangerous. Because it can cause food particles to fly toward you. Therefore it is best to avoid this situation.
You should lower the speed. Moreover, you can use a lid to cover the blender. This will help reduce the splashing. It is also important to turn off the hand mixer immediately.
5 Reasons: Why Does My Hand Blender Splatter?
A hand blender may splatter while in use for several reasons. Some possible causes include:
- The liquid being blended is too thin or watery. This can cause it to splash and splatter easily.
- Operating at a high velocity, the hand blender can splatter liquid. Thus, it can create a chaotic mess.
- Holding the hand blender too far away from the bottom. This results in unwanted splatter and spills.
- Be careful when selecting the blending attachment. It is not specifically designed and can make blending inefficient and messy.
- The extreme heat of the blended liquid is a cause for concern. It may splash and create an unsafe environment.
To prevent splattering, it is important to use the hand blender correctly. Must avoid blending thin or watery liquids at high speeds.
4 Easy Steps To Stop A Hand Blender Splashing

Blender Splashing is a common issue. Many consumer blenders come with lids and other splash guards. Most of them are often not enough to completely prevent splashes when blending. To effectively stop a hand blender from splashing, here are 4 easy steps:
Step 01: Use a blending jug or container with a wide. It is a stable base to blend in. This will help to contain the liquid and prevent splashing.
Step 02: Hold the hand blender close to the bottom of the jug or container. Just blend at a low speed to start with. Gradually increase the speed as needed.
Step 03: Use the blending attachment that is specifically designed for your ninja blender. This will help to create a more efficient blending action and reduce splashing.
Step 04: If the hand blender is splashing excessively, try tilting the jug or container slightly to one side while blending. This will help to create a vortex effect. It will draw the liquid downwards and prevent it from splashing out.
Note: If you are blending hot liquids, make sure to let them cool slightly before blending. Hot liquids are more likely to splash. Moreover, it can cause burns if they come into contact with your skin.
What Are Some Common Problems with Hand Blenders That You May Encounter?
You may experience problems with your hand blender. After 1 year of use, you may find several problems. In this section, I will cover some of the most common hand blender problems. Let’s have a look:
(i) The hand blender’s performance has left the mixture chunky and lumpy. Moreover, it is unable to blend effectively.
(ii) It is vibrating excessively or makes a loud, unpleasant noise while in use.
(iii) Creating a mess while blending.
(iv) Not turning on or not functioning properly.
(v) The blades on the hand blender are not spinning or are not blending effectively.
If you encounter any of these problems while using a hand blender, it is important to troubleshoot the issue. Then, determine the cause.
Is It Normal for a Hand Blender to Spark?
It is not normal for a hand blender to spark. If your hand blender is sparking, there may be a problem with the motor or the blades. You should stop using the hand blender immediately and unplug it.
Are there any alternative ways?
It’s a good idea to check the manufacturer’s website. You can also contact their customer service department to see if the hand blender is under warranty.
In the meantime, you can use a regular blender or a food processor to blend your food.
How much do I need to spend to fix a sparking blender? You may have to spend $5 to $10 based on the problem. If the problem is not so major then $5 to $8 is pretty enough. On the other hand, if the problem is major, then you may have to spend at least $10-$12.
Frequently Answer Questions(FAQs)
How Do You Blend Soup Without Splashing?
Splashes are the biggest problems. It may appear when blending hot liquids like soup. To prevent it from happening, you can do several things. Start by blending the soup at a low speed. Another way is to cover the blender lid with a kitchen towel. This will help contain most of the liquid inside the blender. It is also important to leave the lid on while blending. These are the most common ways to reduce splashing.
What Should You Not Do With a Hand Blender?
The hand blender is a versatile kitchen tool. It should not be used for certain tasks. Never use the hand blender to mix large batches of ingredients. Because the cup or pot that it comes with is too small and the motor can overheat. Also, do not use a hand blender to blend hot liquids. The last thing you want is to burn yourself with hot liquid or steam. Additionally, stay away from tough ingredients. Such as ice and hard nuts.
How Do You Sharpen a Hand Blender?
You can sharpen your hand blender with a fine-toothed file or a sharpening stone. Try to use the fine-toothed file to remove any rough spots on the blade. Place the blade on a flat surface. Then, use the fine-toothed file to remove any scratches or damage on the blade itself. Hold your hand blender with both hands. Then, push down on one side only.
How Do I Keep My Hand Blender in My Kitchen?
The best way to keep your hand blender in your kitchen is to use a magnetic knife rack. You can find these at any store that sells kitchen equipment. You can order one online. Just make sure it’s a magnetic knife rack. Also, not one that just sticks to the refrigerator. Thus, people don’t accidentally cut themselves.
Final verdict
As a blender owner, I’m not off the list. I faced the same issue of splashing while blending. Actually, there are no permanently fixed solutions. But, you can reduce the issues. You almost know the procedure, right?
You should follow every step with appropriate attention. Those 4 steps will help you to reduce the amount of splashing. Try to use low speed while blending to reduce the splashing. If you want to blend frozen fruits, try to add some water to it.
Hope now you know about Stop a Hand Blender Splashing. If you have any other methods, please let me know in the comment section. I would love to hear from you. Thank You.
1 thought on “How to Stop a Hand Blender Splashing -Helpful Guide 2023”